AAATesters


ON SALE NOW!

FEATURED PRODUCTS ON SALE

On Sale! AFL Noyes OLS 2 SM Fiber Laser Light Source – AAATesters.com

On Sale! AFL Noyes OLS 2 SM Fiber Laser Light Source – AAATesters.com

Click for Product Info and Updated Pricing

AFL Noyes OLS 2 Fiber Optic Test

AFL Noyes OLS 2 SingleMode 1550nm Fiber Optical Laser Source

With an output power of -10 dBm, the OLS 2 will provide in excess of 50 dB range when used with Noyes Fiber Systems optical power meters

Includes Carrying Case & Accessories As Listed

OLS2 OLS-2

Noyes OLS2 OLS-2 SM Fiber Light Source Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

Noyes OLS 2 Fiber Light Source

The OLS 2 laser source series offers excellent stability and portability for accurate fiber optic testing. Four versions of the OLS 2 are offered for measurements at 1310 nm, 1550 nm, 1625 nm, and dual wavelength (1310/1550 nm). These compact units operate in either continuous wave (CW) mode or 2 kHz modulated mode.

With an output power of -10 dBm, the OLS 2 will provide in excess of 50 dB range when used with Noyes Fiber Systems optical power meters.

The OLS 2 operates on disposable batteries or AC adapter. A Low battery indication warns the user that battery replacement is necessary. The optical output is via a top panel FC, SC, or ST connector. The output may be equipped with other style connectors upon request.

When used with an optical power meter, the OLS 2 laser source provides an inexpensive alternative to higher priced loss test sets. The OLS 2 may be substituted for terminal equipment in the central office or head-end to provide a stable output for loss measurements.

For singlemode applications, such as Telecom or CATV, the OLS 2 may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 or 1550nm.

In the modulation mode, the OLS 2 applies a 2 kHz tone into the fiber. This signal is detected by the OFI-200B, optical fiber identifier, to isolate specific fibers in a bundle prior to splicing or rerouting.

AFL Noyes OLS 2

Applications

When used with an optical power meter, the OLS 2 laser source provides an inexpensive alternative to higher priced loss test sets. The OLS 2 may be substituted for terminal equipment in the central office or head-end to provide a stable output for loss measurements.

For singlemode applications, such as Telecom or CATV, the OLS 2 may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 or 1550 nm.

In the modulation mode, the OLS 2 applies a 2 kHz tone into the fiber. This signal is detected by the OFI-200B, optical fiberidentifier, to isolate specific fibers in a bundle prior to splicing or rerouting.

Specifications:

Optical Specifications
Output Wavelength (nm) 1550 + 20
Output Power -10 dBm
Laser Classification Class 1
Output Connector FC, SC, or ST
Modes of Operation CW and 2 kHz
Special Width 5 nm typical
Stability + 0.1 dB over 1 hours
General Specifications
Power 9V Battery or AC Adapter (optional)
Operating Temperature 0° to 40°C
Storage Temperature -10° to 50°C
Size (H x W x D) 4.5 x 75 x 1.0 in (11.5 x 7.0 x 2.5 cm)
Weight 1 lb. (0.45 kg)

Condition: Refurbished
Warranty: 90 Day Exchange

Included     

AFL Noyes OLS 2 SingleMode Fiber Optic Laser Source
SM Source:
-1550nm
FC Connector For Source
(2) SM FC-FC Fiber Cables
User Manual On CD-ROM
Carrying Case

OLS 2

AFL Noyes OLS 2 Spec Sheet


ON SALE NOW!

We Buy Test Equipment

Sell or Trade
Your Test Equipment. Fiber Optic Testers, Fusion Splicers, OTDRs, Cable Certifier Testers, CATV Meters, Site Masters, Spectrum Network Analyzers etc... $$ CASH back in your Pocket! $$ We make it Fast, Nice, & Easy!

Fill out Form to Submit Your Sell List