AAATesters


ON SALE NOW!

FEATURED PRODUCTS ON SALE

On Sale! AFL NOYES OPM 4-4D OLS2-1310 OLS2-1550 – AAATesters.com

On Sale! AFL NOYES OPM 4-4D OLS2-1310 OLS2-1550 – AAATesters.com

Click for Product Info and Updated Pricing

AFL Noyes OPM 4-4D Fiber Optic Test

NOYES OPM 4-4D Optical Power Meter , OLS2-1310 Laser Source & OLS2-1550 Laser Source

Noyes OPM4-4D OLS2-1310 OLS2-1550 OPM-4-4D OLS-2-1310 OLS-2-1550 SM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

OPM 4 Optical Power Meter The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.

Features:

Rugged, handheld, lightweight
Multimode or single-mode applications
Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models
Wave IDautomatic wavelength identification and switching
Passive Optical Networks (PON) testing
Dual Wavelength testing
270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
Large LCD with Backlight
Power measurements in dBm or µW; insertion loss in dB
Reference power level storage
AA alkaline, optional rechargeable NiMH battery pack
Battery Gauge
N.I.S.T traceable

Calibrated wavelengths (nm): 850, 980, 1310, 1490, 1550, 1625
Detector type: Filtered InGaAs
Measurement range (dBm): +26 to -50
Tone detect range (dBm):

+6 to -30 +6 to -25 for 850nm
Wavelength ID range (dBm):

+6 to -30 +6 to -25 for 850nm
Accuracy (dB): ± 0.25
Resolution (dB): 0.01
Measurement units: dB, dBm, µW

OLS2 Laser Light Source The OLS2 laser source is a cost-effective, rugged, handheld instrument designed for performing insertion loss measurements on single-mode fi ber optic links when used with an optical power meter. When paired with an optical fi ber identifi er, the OLS2 may be used for fi ber identifi cation. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements.

Two versions of the OLS2 are available for measurements at 1310 nm, 1550 nm. This light source offers 2 modes of operation: continuous wave (CW) and 2 kHz modulated Tone. [Laser Active], [Battery], and [External Power] indicators identify the enabled laser, battery charge status, and external power presence. The output port is equipped with FC, SC, or ST style connector. The OLS2 laser sources operate on disposable batteries or AC adapter. The OLS2 is fully N.I.S.T. traceable.

AFL Noyes OPM 4-4D

Features:

Rugged, handheld, lightweight
Certify single-mode links per TIA/EIA standards
CW or 2 kHz modulated Tone
Long battery life
Low battery indicator
Adjustable output
Cost-effective, easy to use
N.I.S.T. Traceable

Optical Specifications : OLS2-1310 : OLS2-1550
Output wavelength : 1310 ±20 nm : 1550 ±20 nm

Output power1 : -5 dBm : -5 dBm
Laser classification : Class 1 (FDA 21 CFR 1040.10 and 1040.11, and IEC 60825-1)
Output connector2 : FC, SC, or ST
Modes of operation3 : CW and 2 kHz
Spectral width (FWHM) : 5 nm (max), 1625 nm: 5 nm (typ)
Stability : ± 0.1 dB over 1 hour (after 20 min. warm-up)
± 0.15 dB over 8 hours (after 20 min. warm-up)

General Specifications :

Power : Typical 40 hours with 9V battery, optional AC adapter
Operating temperature : -10 to 50°C
Storage temperature : -30 to 60°C
Size (H x W x D) : 5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm)
Weight : 0.65 lb (.29 kg)

Includes: Noyes OPM 6-3 Optical Power Meter
850nm
980nm
1310nm
1490nm
1550nm
1625nm
Noyes OLS2-1310 Laser Source 1310nm
Noyes OLS2-1550 Laser Source 1550nm
Fiber Cables:
SC-ST
SC-SC
SC-FC
Fiber Connectors:
SC-SC
ST-ST
User Manual On CD-ROM
Hard Carrying Case

OPM 4-4D


AFL NOYES OPM 4-4D Spec Sheet


ON SALE NOW!

We Buy Test Equipment

Sell or Trade
Your Test Equipment. Fiber Optic Testers, Fusion Splicers, OTDRs, Cable Certifier Testers, CATV Meters, Site Masters, Spectrum Network Analyzers etc... $$ CASH back in your Pocket! $$ We make it Fast, Nice, & Easy!

Fill out Form to Submit Your Sell List