Noyes OPM4-2 OPM-4-2 SM MM Fiber Power Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
OPM 4 Optical Power Meter
The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.
Features:
Rugged, handheld, lightweight
Multimode or single-mode applications
Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models
Wave ID – automatic wavelength identification and switching
Passive Optical Networks (PON) testing
Dual Wavelength testing
270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
Large LCD with Backlight
Power measurements in dBm or µW; insertion loss in dB
Reference power level storage
AA alkaline, optional rechargeable NiMH battery pack
Battery Gauge
N.I.S.T traceable
AFL Noyes OPM4-2 Optical Power Meter (BC# 19785)
Power Meter:
-850nm
-1300nm
-1550nm
Interchangeable ST Connector For Power Meter
MM ST-ST Fiber Cable
SM ST-ST Fiber Cable
User Manual On CD-ROM
Carrying Case (G)
AFL Telecommunications Noyes MLP 1-2 OPM 1-2B/OLS 1-2 Multimode Fiber Optic Loss Test Set
OLS 1-2 Light Source:
850nm
OPM 1-2B Power Meter:
850nm
1300nm
Includes Hard Carrying Case And Accessories As Listed
OPM1 OLS1
Noyes MLP1-1 MLP-1-1 MM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
Noyes OPM 1-1
This portable optical power meter may be used to measure optical power in premises, telco, or broadband fiber optic networks. When used with an LED or laser light source, the OPM 1 can also measure the attenuation (insertion loss) of multimode or single-mode cables. With only two controls – ON/OFF and wavelength – the OPM 1 is our simplest to use optical power meter. Optical power in dBm and the calibration wavelength setting are displayed on an easy-to-read LCD display. The optical input port accepts Noyes thread-on style connector adapter caps. Adapter caps are required and must be ordered separately. The OPM 1 is fully N.I.S.T. traceable and runs on a standard 9-volt alkaline battery.
MLP 1-1
The MLP 1 test kits are inexpensive solutions for testing multimode and single-mode systems. By joining the OPM 1 optical power meter and the OLS 1 optical light source, the MLP 1 is a great kit for beginners or network owners. Two versions of the MLP1 test kit are available for testing Premises networks, LAN, and Gigabit Ethernet.
Multimode Testing
Loss measurements at 850
Field portable, battery operated
N.I.S.T. traceable
OLS 1-1
Output ports
1
Output wavelength
850 + 35/-40 nm
Spectral width (typ) (FWHM)
40 nm
Output power
-20 dBm
Stability (@25°C, 5 min. warm-up)
0.1 dB over 8 hours
Fiber size
62.5 µm
Emitter type
Class 1 (IEC 60825 – 1)
Power
Typical 60 hours with 9V battery, optional AC adapter
Connector
ST
Size (H x W x D)
5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm)
Weight
0.65 lb (.29 kg)
Condition: Refurbished
Warranty: 90 Day Exchange
Included
Noyes OPM 1-2 Optical Power Meter (BC# 2820A)
-850nm
-1300nm
-Interchangeable ST Connector
Noyes OLS 1-2 Optical Light Source (BC# 06725)
-850nm
-Interchangeable ST Connector
(2) Multimode ST-ST Fiber Cables
User Manual On CD-ROM
Hard Carrying Case
The FTS-3 Fiber-optic Talk Set is intended primarily for use on spare (dark) fibers to allow users to communicate while testing other fibers in the bundle.
Includes Carrying Case And Accessories As Listed!
Noyes FTS3 FTS-3 Fiber Optic Talk Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
FTS 3 Fiber-optic Talk Set
The FTS 3 works directly with terminated optical connectors and can also be used as a stabilized laser source to perform loss tests. The FTS 3 can also generate and receive a 2kHz Tone for fiber identification.
The FTS 3 Fiber-optic Talk Set is intended primarily for use on spare (dark) fibers to allow users to communicate while testing other fibers in the bundle. The FTS 3 is useful where other types of communication are not available or desirable; for example, new construction where standart telephone lines have not yet been installed or a tunnel where radios may not work well.
FTS 3 Fiber-optic Talk Set
The FTS 3 works directly with terminated optical connectors and can also be used as a stabilized laser source to perform loss tests. The FTS 3 can also generate and receive a 2kHz Tone for fiber identification.
The FTS 3 Fiber-optic Talk Set is intended primarily for use on spare (dark) fibers to allow users to communicate while testing other fibers in the bundle. The FTS 3 is useful where other types of communication are not available or desirable; for example, new construction where standart telephone lines have not yet been installed or a tunnel where radios may not work well.
AFL NOYES OPM 4 Singlemode 1310nm/1550nm & Multimode 850nm/1300nm Loss Test Set
NOYES OPM 4-2C Optical Power Meter
850nm
1300nm
1310nm
1550nm
NOYES OLS2D Dual Laser Source
1310nm
1550nm
Noyes OLS1-2 Optical Light Source
850nm
1300nm
Includes Hard Carrying Case & Accessories As Listed!
OPM4-2 C OLS2-D OLS 1-2 1
Noyes OPM4-2C OLS2D OLS1-2 OPM-4-2C OLS-2D OLS-1-2 SM MM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
OLS 1-2
Optical Light Source
OLS 1-2
Wavelength
850, 1300nm
Emitter Type
LED
Stability
±0.1 dB/8 hrs.
Output Power
Multimode (62.5/125µm)
-20dBm @ 850nm, -20dBm @ 1300nm
Single-mode ( 9/125µm)
-40dBm @ 1300nm
Power
80 hrs. typical operation with 9V alkaline,
AC adapter optional
Optical Connectors
ST
Size (H x W x D)
4.6 x 2.6 x 1.2in (11.7 x 6.6 x 3.2cm)
OLS2D
The OLS2-Dual from AFL Telecommunications is a handheld, rugged laser source designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the OLS2-Dual may be used for fiber identification. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements.
The OLS2-Dual features 1310 nm and 1550 nm LASER output from a single output port and offers several modes of operation. Each wavelength may be transmitted individually at CW or with user selectable modulated Tone. Also, each wavelength may be transmitted with Wave ID. When transmitting with Wave ID, the OLS2-Dual supports transmitting pairs of wavelengths in an alternating pattern. Associated with each operating condition, the designated LED indicator will illuminate to identify the currently enabled operating mode and emitted wavelength(s) along with battery charge status and external power presence.
The OLS2-Dual output port is equipped with a UCI based removable adapter to allow the output connector to be inspected and cleaned. The OLS2-Dual offers long battery life from common AA alkaline batteries with external AC adapter available as an option.
The OLS2-Dual is fully N.I.S.T. traceable.
Features:
Handheld, rugged, lightweight
Dual wavelengths from a single port
Dual or single Wave ID, CW, To
270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
Adjustable output
Low battery LED indicator
Long battery life with 2 x AA alkaline, optional AC adapter
Cost-effective, easy to use
N.I.S.T. Traceable
Certify SM links per TIA/EIA standards
Fiber identification prior to splicing
Noyes OPM 4 – Adds Wave ID & Set Reference
The Noyes OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables.
The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack.
The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.
The OPM 4-2C is calibrated at 850, 1300, 1310 and 1550 nm for testing LAN, FDDI, ethernet, token ring and single-mode fiber systems such as telco, WAN, and CATV.
Specifications
Optical Specifications
OPM 4-2C
Calibrated Wavelengths (nm)
850, 1300, 1310, 1550
Detector Type
Germanium (Ge)
Measurement Range (dBm)
+6 To -60
Accuracy (dB)
+-.25
Measurement Units
dB, dBm, uW
General Specifications
Power
typical 60 hours with 9V battery
Adapter caps
order separately (ST, SC, FC, and others available)
Operating temperature
-10 to 50°C
Relative humidity
0 to 95% (non-condensing)
Storage temperature
-30 to 60°C
Size (H x W x D)
5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm)
Weight
0.58 lb (0.26 kg)
Condition: Refurbished
Warranty: 90 Day Exchange
Included
Noyes OPM 4-2C Optical Power Meter
-850nm
-1300nm
-1310nm
-1550nm
-Interchangeable ST Connector
Noyes OLS2D Dual Laser Source
-1310nm
-1550nm
Noyes OLS1-2 Optical Light Source
-850nm
-1300nm
Fiber Cables:
-SM FC-ST
-MM ST-ST
User Manual On CD-ROM
Hard Carrying Case
The OFS 300-200C offers precision 200x magnification to easily inspect both multimode and single-mode fiber optic connectors.
Includes Carrying Case & Accessories As Listed
OPM4 OPM4-4D 4 4-4
Noyes OPM4-4D OFS300-OPM-4-4D OFS-300-200C Fiber Inspection Kit Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
OPM 4-4D Optical Power Meter
The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.
Features:
Rugged, handheld, lightweight
Multimode or single-mode applications
Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models
Wave ID automatic wavelength identification and switching
Passive Optical Networks (PON) testing
Dual Wavelength testing
270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
Large LCD with Backlight
Power measurements in dBm or µW; insertion loss in dB
Reference power level storage
AA alkaline, optional rechargeable NiMH battery pack
Battery Gauge
N.I.S.T traceable
The OFS 300 is a versatile instrument for the inspection of optical fiber connectors. By employing a universal adapter mount, the OFS 300 offers the ability to inspect virtually any connector style for scratches, dirt, or other problems normally associated with poor transmission performance.
The OFS 300-200C offers precision 200x magnification to easily inspect both multimode and single-mode fiber optic connectors.
The OFS 300 offers 60 hours of continuous battery life. A low battery indicator will flash when approximately 8 hours of optimum brightness remains reducing the risk of eye strain. Various adapter caps are available to convert the mount to the desired connector style. The OFS 300-200C uses the same common threaded connector adapter caps as the Noyes Optical Power Meters and Loss Test Sets.
Specifications:
Optical Specifications
OFS 300-200C
Nominal magnification
200X
Adapter cap Mount
thread-on (Universal)
Safety filter
Schott KG3 > 40 dB IR
General Specifications
Operating temperature
0 to +50°C
Storage temperature
-20 to +50°C
Power
2 AA alkaline batteries
Weight in use
1.5 lbs. (.67 kg)
Size (H x W x D)
5 x 2 x 8 in. (13 x 5 x 20 cm)
Condition: Refurbished
Warranty: 90 Day Exchange
Included
Noyes OPM 4-4D Optical Power Meter (BC# 19440)
Power Meter:
-850nm
-980nm
-1310nm
-1490nm
-1550nm
-1625nm
FC Connector For Power Meter
Noyes OFS 300-200C Optical FiberScope w/ Carrying Case (BC# 19439)
SM FC-FC Fiber Cable
MM FC-FC Fiber Cable
(4) Fiber Optic Wipes
User Manual On CD-ROM
Carrying Case (G)
AFL Telecommunications Noyes MLP 1-2 OPM 1-2 /
OLS 1-2 Multimode 850/1300nm Fiber Optic Loss Test Set
OLS 1-2 Light Source:
– 850nm
– 1300nm
OPM 1-2 Power Meter:
– 850nm
– 1300nm
– 1550 nm
Includes Hard Carrying Case & Accessories As Listed
Noyes MLP1-2 MLP-1-2 MM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
Noyes OPM 1-2
This portable optical power meter may be used to measure optical power in premises, telco, or broadband fiber optic networks. When used with an LED or laser light source, the OPM 1 can also measure the attenuation (insertion loss) of multimode or single-mode cables. With only two controls – ON/OFF and wavelength – the OPM 1 is our simplest to use optical power meter. Optical power in dBm and the calibration wavelength setting are displayed on an easy-to-read LCD display. The optical input port accepts Noyes thread-on style connector adapter caps. Adapter caps are required and must be ordered separately. The OPM 1 is fully N.I.S.T. traceable and runs on a standard 9-volt alkaline battery.
MLP 1-2
The MLP 1 test kits are inexpensive solutions for testing multimode and single-mode systems. By joining the OPM 1 optical power meter and the OLS 1 optical light source, the MLP 1 is a great kit for beginners or network owners. Two versions of the MLP1 test kit are available for testing Premises networks, LAN, and Gigabit Ethernet.
Multimode Testing
Loss measurements at 850 and 1300nm
Includes 50 and 62.5 µm mandrels
Field portable, battery operated
Certify 50 or 62.5 µm multimode fiber links for any 850 or 1300nm application, including Gigabit Ethernet (GBE)
N.I.S.T. traceable
Condition: Refurbished
Warranty: 90 Day Exchange
Included
Noyes OPM 1-2-B Optical Power Meter (BC# 15439M)
-850nm
-1300nm
-1550nm
-Interchangeable ST Connector For Power Meter
Noyes OLS 1-2-ST Optical Light Source (BC# 15440M)
-850nm
-1300nm
-(2) ST Connectors For Source
Noyes OPM 1 Specifications Sheet
Noyes OLS 1 Specifications Sheet
Noyes OLS 1 & OPM 1 Operating Instructions
(2) MM ST-ST Fiber Cables
Hard Carrying Case
AFL Noyes OPM4 OLS2 Singlemode 1310 / 1550nm Fiber Loss Test Set
OPM4-4C Optical Power Meter w/
Noyes OLS2-Dual 1310 / 1550nm Singlemode Laser Light Source & OFS 300-200B Optical Fiber Scope
Power Meter Test Capabilities:
– 850nm
– 980nm
– 1310nm
– 1480nm
– 1550nm
– 1625nm
Includes Carrying Case & Accessories As Listed
SLP4-6 OPM 4-4C OPM 4-C OLS 2 OLS-2
Noyes SLP4-6 SLP-4-6 SM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
Noyes OPM 4-4C
The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.
Features:
Rugged, handheld, lightweight
Multimode or single-mode applications
Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models
Wave ID – automatic wavelength identification and switching
Passive Optical Networks (PON) testing
Dual Wavelength testing
270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
Large LCD with Backlight
Power measurements in dBm or µW; insertion loss in dB
Reference power level storage
AA alkaline, optional rechargeable NiMH battery pack
Battery Gauge
N.I.S.T traceable
Calibrated wavelengths (nm)
980, 1310, 1580, 1550, 1625
Detector type
Filtered InGaAs
Measurement range (dBm)
+26 to -50
Tone detect range (dBm)
+6 to -30
+6 to -25 for 850nm
Wavelength ID range (dBm)
+6 to -30
+6 to -25 for 850nm
Accuracy (dB)
± 0.25
Resolution (dB)
0.01
Measurement units
dB, dBm, µW
OLS2D
The OLS2-Dual from AFL Telecommunications is a handheld, rugged laser source designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the OLS2-Dual may be used for fiber identification. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements.
The OLS2-Dual features 1310 nm and 1550 nm LASER output from a single output port and offers several modes of operation. Each wavelength may be transmitted individually at CW or with user selectable modulated Tone. Also, each wavelength may be transmitted with Wave ID. When transmitting with Wave ID, the OLS2-Dual supports transmitting pairs of wavelengths in an alternating pattern. Associated with each operating condition, the designated LED indicator will illuminate to identify the currently enabled operating mode and emitted wavelength(s) along with battery charge status and external power presence.
The OLS2-Dual output port is equipped with a UCI based removable adapter to allow the output connector to be inspected and cleaned. The OLS2-Dual offers long battery life from common AA alkaline batteries with external AC adapter available as an option.
The OLS2-Dual is fully N.I.S.T. traceable.
Handheld, rugged, lightweight
Dual wavelengths from a single port
Dual or single Wave ID, CW, To
270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
Adjustable output
Low battery LED indicator
Long battery life with 2 x AA alkaline, optional AC adapter
Cost-effective, easy to use
N.I.S.T. Traceable
Applications:
Certify SM links per TIA/EIA standards
Fiber identification prior to splicing
OFS 300-200B Optical Fiber Scope
The OFS 300 is a versatile instrument for the inspection of optical fiber connectors. By employing a universal adapter mount, the OFS 300 offers the ability to inspect virtually any connector style for scratches, dirt, or other problems normally associated with poor transmission performance.
The OFS 300 offers 60 hours of continuous battery life. A low battery indicator will flash when approximately 8 hours of optimum brightness remains reducing the risk of eye strain. Various adapter caps are available to convert the mount to the desired connector style. The OFS 300-200B uses the same common threaded connector adapter caps as the Noyes Optical Power Meters and Loss Test Sets.
Specifications:
Optical Specifications
OFS 300-200B
Nominal magnification
200X
Adapter cap Mount
thread-on (Universal)
Safety filter
Schott KG3 > 40 dB IR
General Specifications
Operating temperature
0 to +50°C
Storage temperature
-20 to +50°C
Power
2 AA alkaline batteries
Weight in use
1.5 lbs. (.67 kg)
Size (H x W x D)
5 x 2 x 8 in. (13 x 5 x 20 cm)
Condition: Refurbished
Warranty: 90 Day Exchange
Included
AFL Noyes OPM4-4C optical Power meter (BC# 16307)
Power Meter:
-850nm
-980nm
-1310nm
-1480nm
-1550nm
-1625nm
Interchangeable FC Connector For Power Meter
2.5mm Connector For Power Meter
SC Connector For Power Meter
Noyes OLS2-DUAL Laser Light Source (BC# 16308)
SM Source:
-1310nm
-1550nm
FC Connector For Source
Noyes OFS 300-200B Optical Fiber Scope (BC# 16309)
Interchangeable 2.5mm Connector For Power Meter
Cletop Type A Fiber Connector Cleaner
(2) SM FC-FC Fiber Cables
User Manual On CD-ROM
Noyes Case For Fiberscope w/ Strap
Carrying Case (G)
AFL Noyes SLP 4-6D OPM4-3D/OLS2 Dual Singlemode Loss Test Set
NOYES OLS2D Dual Laser Source
1310nm
1550nm
NOYES OPM 4-3D Optical Power Meter
850nm
1300nm
1310nm
1490nm
1550nm
1625nm
Includes Carrying Case & Accessories As Listed!
Noyes SLP4-6D OPM4-3D OLS2D SLP-4-6D OPM-4-3D OLS-2D SM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
Noyes OPM 4-3D
The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.
Features:
Rugged, handheld, lightweight
Multimode or single-mode applications
Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models
Wave ID – automatic wavelength identification and switching
Passive Optical Networks (PON) testing
Dual Wavelength testing
270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
Large LCD with Backlight
Power measurements in dBm or µW; insertion loss in dB
Reference power level storage
AA alkaline, optional rechargeable NiMH battery pack
Battery Gauge
N.I.S.T traceable
OLS2 Dual
The OLS2-Dual from AFL Telecommunications is a handheld, rugged laser source designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the OLS2-Dual may be used for fiber identification. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements.
The OLS2-Dual features 1310 nm and 1550 nm LASER output from a single output port and offers several modes of operation. Each wavelength may be transmitted individually at CW or with user selectable modulated Tone. Also, each wavelength may be transmitted with Wave ID. When transmitting with Wave ID, the OLS2-Dual supports transmitting pairs of wavelengths in an alternating pattern. Associated with each operating condition, the designated LED indicator will illuminate to identify the currently enabled operating mode and emitted wavelength(s) along with battery charge status and external power presence.
The OLS2-Dual output port is equipped with a UCI based removable adapter to allow the output connector to be inspected and cleaned. The OLS2-Dual offers long battery life from common AA alkaline batteries with external AC adapter available as an option.
The OLS2-Dual is fully N.I.S.T. traceable.
Handheld, rugged, lightweight
Dual wavelengths from a single port
Dual or single Wave ID, CW, To
270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
Adjustable output
Low battery LED indicator
Long battery life with 2 x AA alkaline, optional AC adapter
Cost-effective, easy to use
N.I.S.T. Traceable
Optical
OPM 4-3D
Optical Calibrated Wavelengths (nm)
850, 1300, 1310, 1550, 1625
Detector Type
InGaAs
Measurement Range (dBm)
+ 6 to – 70
Tone detect Range (dBm)
+6 to -50
+6 to -45 for 850nm
Wavelength ID range (dBm)
+6 to -50
+6 to -45 for 850nm
Accuracy (dB)* *Accuracy measured at 25 C and -10 dBm p per N.I.S.T. standards.
+/- 0.25
Resolution (dB)
0.01
Measurement units
dB, dBm, ?W
General
Power
2 x AA batteries, optional NiMH
Battery life (2 x AA)
300 hours
Operating temperature
-10 to 50 C, 90% RH (non-condensing)
Storage temperature
-30 to 60 C, 90% RH (non-condensing)
Size (H x W x D)
5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm)
Weight
0.58 lb (0.26 kg)
Applications:
Certify SM links per TIA/EIA standards
Fiber identification prior to splicing
Condition: Refurbished
Warranty: 90 Day Exchange
Included
Noyes OPM 4-3D Optical Power Meter
-850nm
-1300nm
-1310nm
-1490nm
-1550nm
-1625nm
-Interchangeable SC Connector
Noyes OLS2 Dual Laser Source
-1310nm
-1550nm
-Interchangeable SC Connector
CleTop Reel Type A Optical Fiber Connector Cleaner
(2) SM SC-SC Fiber Cables
Hard Copy User Manual
Carrying Case
Includes Hard Carrying Case & Accessories As Listed
MLP5-2 OLS-1 OLS 1 OPM5-2 OPM5-2D OPM 5-2
Noyes MLP5-2 MLP-5-2 SM MM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
Noyes MLP 5-2 Multimode Test Set
The Noyes MLP5-2 fiber optic loss test kit combines the OPM5-2C optical power meter and OLS1-Dual LED light source and is ideally suited for testing multimode fiber optic networks.
The OLS1-Dual features 850 nm and 1300 nm LED output from a single output port and is easy to operate with only a power button and a wavelength select button. The LED output is stabilized to ensure accurate test results per current TIA/EIA requirements. This light source offers 3 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, and CW. [Active Output], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. The output port is equipped with a removable SC (FC & ST available) adapter to allow the output connector to be inspected and cleaned.
The OPM5-2C offers Wave ID, automatic wavelength identification and switching, when used with the OLS1-Dual light source. The OPM5-2C stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or ¼W] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. Up to 500 records per wavelength of power or insertion loss measurements may be stored in internal non-volatile memory.
Using the supplied Windows® compatible software and USB connection, test records may be transferred to a PC for storage, display, analysis, and printing.
In addition to being powered by two AA alkaline, the OPM5-2C or OLS1-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack.
The OPM5-2C optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately.
The OPM5-2C and OLS1-Dual are fully N.I.S.T. traceable.
Features:
Rugged, handheld, lightweight
Designed for field use
Certify multimode fiber links per TIA/EIA standards
Wave ID – automatic wavelength identification and switching
Dual Wave ID, single Wave ID, and CW
Large LCD with Backlight
Power measurements in dBm or µW; insertion loss in dB
Reference power level storage
Up to 500 test records storage per wavelength
USB port for download of stored records
AA alkaline, optional rechargeable NiMH battery pack or AC adapter
Low battery indicator
Cost-effective, easy to use
N.I.S.T. traceable
OPM 5-2C
The OPM 5 is used to perform diagnostic and evaluation measurements associated with fiber optic transmission systems and cable plant. Applications for the OPM 5 will be found within the telecommunication, cable television, data network, and industrial control industries.
The OPM 5 measures absolute power (in dBm or µW ) and loss (dB). Absolute power expressed in dBm is the amount of optical power received by the detector as compared to 1mW (0dBm=1mW). Measuring dBm is useful for verifying the output power of a transmitter and determining system losses.
Loss is the difference in optical power from a known input (the reference level) and the output power at the opposite end of the fiber under test. The OPM 5 can display dB loss directly after a reference level has been set. Loss measurements are used to qualify cable plant links and fiber optic jumpers.
Microwatts is also a way to measure absolute power. Some manufacturers specify their transmission equipment in watts instead of dBm. The OPM 5 offers the ability to measure watts for convenience when verifying output power of transmitters. For accurate results, always be sure to set the OPM 5 to measure the same wavelength as the output of the optical light source.
Specifications:
Calibration Wavelength (nm)
850, 1300, 1310,
1550nm
Tone Detection Range (dBm)
+6 to – 35
Tone Detection Frequency (Hz)
270 ± 13.5
1000 ± 50
2000 ± 300
Detector Type
Germanium (Ge)
Display Range (dBm)
+6 to -60 dBm
Accuracy (@ 25°C & -10.0dBm)
±0.25 dB
Resolution
0.01 dB (.1 dB selectable)
Battery Life
>30 hrs. typical operation with 9V Alkaline
Adapter Caps
Order Separately (ST, SC, FC and others available)
Size (H x W x H)
5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm)
Weight
0.56 lb (0.26 kg)
Operating Temp
0° to 50° C
Storage Temp
30° to 60° C
Relative Humidity
0 to 95% (non-condensing)
Optical Light Source OLS 1-Dual
Emitter Type
LED
Emitter Classification
Class 1, IEC 825
Spectral Width
40, 100 nm
Wavelength
850, 1300 nm
Stability (@25° C & 5 min. warm-up)
±.1 dB/8 hrs.
Output Power
Multimode (62.5/125 ìm)
-20 dBm @ 850 nm, -20 dBm @ 1300 nm
Singlemode (9/125 ìm)
-40 dBm @ 1300 nm
Power
40 hrs. typical operation with 9V alkaline, AC adapter optional
Optical Adaptors
ST or SC
Size (H x W x D)
4.6 x 2.6 x 1.2 in (11.6 x 6.6 x 3.1 cm)
Condition: Refurbished
Warranty: 90 Day Exchange
Included
AFL / Noyes OPM 5 Optical Power Meter (BC# 19877)
Power Meter:
-850nm
-1300nm
-1310nm
-1550nm
Interchangeable ST Connector For Power Meter
AFL / Noyes OLS1D MultiMode Optical Light Source (BC# 19878)
MM Source:
-850nm
-1300nm
Interchangeable ST Connector For Source
62.5?m Mandrel
50/1000?m Mandrel
(2) MM ST-ST Fiber Cable
USB PC Interface Cable
User Manual On CD-ROM
Hard Carrying Case
AFL Noyes Multimode Fiber Optic Loss Test Set
Noyes CSS1-MM Multimode LED Fiber Optic Light Source
&
Noyes CSM1-2 Singlemode / Multimode Power Meter
Test 850nm & 1300nm Wavelengths!
CSM1-2 Power Meter
850nm
1300nm
1310nm
1550nm
CSS1-MM Light Source
850nm
1300nm
Includes Carrying Case & Accessories As Listed!
Noyes CSS1 CSM1 CSS-1 CSM-1 MM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
The NOYES CSS1-MM from AFL a palm-sized, cost-effective dual LED light source designed for performing insertion loss measurements on multimode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the CSS1-MM may be used for fiber identification. The LED output is stabilized to ensure accurate test results per current TIA/EIA requirements. Weighing only 0.4 lb, this light source is ideal for field use.
The CSS1-MM features 850 nm and 1300 nm LED output from a single output port and is easy to operate. Each wavelength may be transmitted individually at CW or with user selectable modulated Tone. The optical output port is equipped with a fixed SC connector. A large LCD display with backlight shows emitted wavelengths [nm], tone frequency [Hz], and indicates a low battery condition. The CSS1-MM offers a five-minute auto-off feature and long battery life from common AA alkaline batteries.
The CSM1-2 optical power meter operates at 850/ 1300/ 1310/ 1550 nm and features multiple test Tone detection for fi ber identifi cation. The CSM1-2 stores optical references for each calibrated wavelength. An easy to read LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone frequency [Hz], and Low battery condition. The CSM1 optical input port accepts Noyes thread-on style adapter caps. One adapter cap, 2.5 mm Universal, is included. A variety of Noyes thread-on style adapter caps (FC, SC, LC, etc.) may be ordered separately.
Weighing only 0.4 lb each, units are compact and convenient for fi eld use. The CSS1-MM Dual LED light source, CSS1-SM Dual LASER source, and CSM1-2 optical power meter are fully N.I.S.T. traceable.
Palm-sized, rugged, lightweight
Certify multimode fiber links per TIA/EIA standards
CW and modulated Tone
270, 330, 1000, and 2000 Hz supported Tone
Power measurements in dBm or µW; insertion loss in dB
Reference power level storage
Large LCD with Backlight
AA alkaline, optional NiMH or NiCd
Automatic power-off function
Battery Gauge
Free 50 µm and 62.5 µm mandrels
Cost-effective, easy to use
N.I.S.T traceable
CSS1-MM Specifications
Optical
CSS1-MM (single port)
Output wavelength
850 nm ±20 nm
1300 nm +40/-60 nm
Spectral width (max)
35 nm
170 nm
Output power
-20.0 dBm into 62.5/125 fiber
Laser classification
Class 1 (IEC 60825 – 1)
Stability
± 0.1 dB over 1 hour (after 30 sec. typically)
± 0.15 dB over 8 hours (after 30 sec. typically)
Display type
Liquid Crystal Display w/LED Backlight
Power
2 x AA batteries, optional NiMH or NiCd
Battery life
30 hours typical (with 2 x AA Alkaline)
Output connector
SC
Operating temperature
-10 to 50°C, 90% RH (non-condensing)
Storage temperature
-30 to 60°C, 90% RH (non-condensing)
Size (H x W x D)
4.2 x 2.5 x 1.25 in (10.7 x 6.4 x 3.2 sm)
Weight
0.4 lb (0.18 kg)
CSM1-2 Specifications
Optical
CSM1-2
Calibrated wavelength
850, 1300, 1310, 1550 nm
Detector type
Germanium (Ge)
Measurement range
+6 to -60 dBm
Tone detect range
+6 to -50 dBm +6 to -45 dBm for 850 nm
Accuracy
± 0.3 dB*
Resolution
0.01 dB
Measurement units
dB, dBm, ìW
Display Type
Liquid Crystal Display w/LED Backlight
Fiber Type
Single-mode/ Multimode
Power
2 x AA batteries, optional NiMH or NiCd
Battery life
> 300 hours (with 2 x AA Alkaline)
Operating temperature
-10 to 50°C, 90% RH (non-condensing)
Storage temperature
-30 to 60°C, 90% RH (non-condensing)
Size (H x W x D)
4.2 x 2.5 x 1.25 in (10.7 x 6.4 x 3.2 sm)
Weight
0.4 lb (0.18 kg)
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
