On Sale! AFL Noyes OLS2 SM Fiber Laser Light Source – AAATesters.com

Click for Product Info and Updated Pricing

AFL Noyes OLS2 Fiber Optic Test

AFL Noyes OLS 2 SingleMode 1310nm Fiber Optical Laser Source

With an output power of -10 dBm, the OLS 2 will provide in excess of 50 dB range when used with Noyes Fiber Systems optical power meters

Includes Carrying Case & Accessories As Listed

OLS 2-1300 OLS2

Noyes OLS2 OLS-2 SM Fiber Light Source Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

Noyes OLS 2 SM Fiber Light Source
The OLS 2 laser source series offers excellent stability and portability for accurate fiber optic testing. Four versions of the OLS 2 are offered for measurements at 1310 nm, 1550 nm, 1625 nm, and dual wavelength (1310/1550 nm). These compact units operate in either continuous wave (CW) mode or 2 kHz modulated mode.

With an output power of -10 dBm, the OLS 2 will provide in excess of 50 dB range when used with Noyes Fiber Systems optical power meters.

The OLS 2 operates on disposable batteries or AC adapter. A Low battery indication warns the user that battery replacement is necessary. The optical output is via a top panel FC, SC, or ST connector. The output may be equipped with other style connectors upon request.

When used with an optical power meter, the OLS 2 laser source provides an inexpensive alternative to higher priced loss test sets. The OLS 2 may be substituted for terminal equipment in the central office or head-end to provide a stable output for loss measurements.

For singlemode applications, such as Telecom or CATV, the OLS 2 may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 or 1550nm.

In the modulation mode, the OLS 2 applies a 2 kHz tone into the fiber. This signal is detected by the OFI-200B, optical fiber identifier, to isolate specific fibers in a bundle prior to splicing or rerouting.

AFL Noyes OLS2

Applications

When used with an optical power meter, the OLS 2 laser source provides an inexpensive alternative to higher priced loss test sets. The OLS 2 may be substituted for terminal equipment in the central office or head-end to provide a stable output for loss measurements.

For singlemode applications, such as Telecom or CATV, the OLS 2 may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 or 1550 nm.

In the modulation mode, the OLS 2 applies a 2 kHz tone into the fiber. This signal is detected by the OFI-200B, optical fiberidentifier, to isolate specific fibers in a bundle prior to splicing or rerouting.

Specifications:

Optical Specifications
Output Wavelength (nm) 1310 + 20
Output Power -10 dBm
Laser Classification Class 1
Output Connector FC, SC, or ST
Modes of Operation CW and 2 kHz
Special Width 5 nm typical
Stability + 0.1 dB over 1 hours
General Specifications
Power 9V Battery or AC Adapter (optional)
Operating Temperature 0° to 40°C
Storage Temperature -10° to 50°C
Size (H x W x D) 4.5 x 75 x 1.0 in (11.5 x 7.0 x 2.5 cm)
Weight 1 lb. (0.45 kg)

Condition: Refurbished
Warranty: 90 Day Exchange

Included     

AFL Noyes OLS 2 SingleMode Fiber Optic Laser Source (BC# 19566)
SM Source:
-1310nm
ST Connector For Source
(2) SM ST-ST Fiber Cables
User Manual On CD-ROM
Carrying Case

OLS2

AFL Noyes OLS2 Spec Sheet

Leave a Reply

Your email address will not be published. Required fields are marked *