On Sale! NOYES SLP 6-3 SM Fiber Test Kit +NOYES OFI-200 OFI – AAATesters.com
FEATURING THE : NOYES OPM6 – Optical Power Meter – 850nm , 1300nm , 1310nm + 1550nm & NOYES OLS6 – Dual Wavelength – 1310nm + 1550nm – Optical Light Source : & NOYES OFI-200 OFI & EXFO FLS-235B Pocket Pal Fault Locator.
Noyes SLP6-3 SLP-6-3 SM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
NOYES SLP 6-3 SM Fiber Optic Test Kit :
FEATURING THE :
NOYES OPM6 – Optical Power Meter – 850nm , 1300nm , 1310nm + 1550nm
NOYES OLS6 – Dual Wavelength – 1310nm + 1550nm – Optical Light Source :
NOYES OFI-200 Optical Fiber Identifier :
EXFO FLS-235B Pocket Pal Fault Locator :
Noyes Fiber Systems’ OFI 200B Optical Fiber Identifier :
is a low-cost, high-technology approach to non-invasive fiber optic signal detection. Using a low-insertion loss, macro-detection technique, this device accurately discriminates fiber optical signals without disrupting service or overstressing the fiber. During installations, cutovers, maintenance and restoration, the OFI 200B is used to identify optical fibers carrying normal traffic, a 2-kHz tone or if no signal is present (dark).
The OFI 200B uses a sophisticated detection scheme which allows for a gradual, short-length bending of the fiber under test. This technique ensures low stress (<100 kpsi max) and low insertion loss (0.5 dB typical @ 1300 nm) while providing sensitive signal detection.
Device measures 1.1″ x 1.5″ x 8.5″ and weighs 10 ounces with 9-volt alkaline battery.
Noyes OFI-200B Optical Fiber Identifier
Soft Carrying Case
The EXFO FLS-235B Pocket Pal Fault Locator Features :
Bright red laser at 635 or 670 nm
Pulsed and continuous operation
80 hours of operation in flashing mode (typical)
Standard AA alkaline batteries
Rugged and weatherproof
FC, ST, or SC connector
Compliant with Bellcore TR-NWT-001319 optical power requirements
Easy to use :
The Pocket Pal is the easiest way to identify fibers from end to end and polished connector end faces. Its red laser shines through most yellow-jacketed fibers to help you pinpoint breaks, bends, faulty connectors, splices, and other causes of signal loss. It has a reach of up to 5 km*. The convenient FLS-235B locates faults visually by creating a bright red glow at the exact location of the fault on singlemode or multimode fibers.
Easy on your budget :
Priced to accommodate the tightest budgets, the FLS-235B Pocket Pal is a truly affordable way to locate faults in OTDR dead zones. Its effectiveness justifies purchasing one for just about every fiber technician.
Operation: CW/1 Hz
Wavelength (nm): 635 ±10
Emitter type: laser
Power output (typical) (mW): 0.80
Distance range: 5 km / 3 mi.
NOYES OPM6 850 1300 1310 + 1550nm Optical Power Meter
NOYES OLS6 1310nm + 1550nm Dual SM Optical Light Source
NOYES OFI-200 Optical Fiber Identifier
EXFO FLS-235B Pocket Pal Fault Locator
(1) Interchangable SC Connector for OPM6
(1) Interchangable FC Connector for OPM6
Fiber Clean-Connector Cleaning System
(1) SC to SC Fiber Patch Cable – SM
(1) FC to FC Fiber Patch Cable – SM
(1) FC to SC Fiber Patch Cable – SM
(1) RS232 DIN PC Interface Cable
Hard Copy Manual for FLS-235B
(1) FC – FC Fiber Connector
(1) FC – SC Fiber Connector
(1) SC – SC Fiber Connector
NOYES WINTEST Software
Carrying Case for Entire Kit
Soft Case for FLS-235B
Hard Copy Manual